七麦数据

~ TEXT and VOICE CHAT with your nearby friends with NO INTERNET connection! ~

DirectTalk 2 is a text/call/walkie-talkie app that works *offline*, without sending data over the Internet, unlike others on the App Store!

Just turn on your WiFi radio, and be in range of other devices. All devices on a channel connect effortlessly when nearby, just like Wi-Fi Direct and Bluetooth. When available, it uses your Local Area Network (LAN) as well, and you can leave it running in the background!

NOTE: Please read the specifications carefully - This app transmits data directly using your Wi-Fi antenna. ***WI-FI IS NOT THE INTERNET!*** This means it has limits in areas like range, and does NOT work like Internet-based apps that functions anywhere with an Internet connection.

PSA: DirectTalk was formerly known as Walkie Talkie P2P.


== Requirements ==

For maximum performance, please use the same app version and same OS version. It usually maintains a good performance within 10 meters (33 feet) apart.

Clear line-of-sight in open spaces with no signal interference, together with device models with newer Wi-Fi radio antennas, can increase range - potentially up to 30 meters (100 feet) in perfect scenarios.

These ranges can also be extended via LAN if all users are connected to the same LAN over Wi-Fi access points spread across multiple locations, such as in workplaces.


== Feature Set & Specifications ==

Completely offline & private:

- No connection to the Internet needed.
- No Wi-Fi network nor Cellular connection needed.
- Broadcast to offline public channels, or use an encrypted private channel with a secret password.

Transmit to nearby devices with minimal configuration:

- Choose the same channel, then start talking!
- 10 meters (33 feet) standard range via direct connections.
- Extra range available with unobstructed line-of-sight, low interference and modern antennas.
- Extra range available via WLAN,* e.g., workplaces with multiple Wi-Fi access points.

Multiple microphone activation modes, via:

- Push-to-Talk (PTT): for a traditional walkie talkie experience, or
- Voice Activated (VOX): for a hands-free experience, or
- Raise to Speak: for a phone-call-like experience.

Advanced audio configuration:

- Use Voice Isolation for improved voice quality on supported devices, even in noisy environments.
- Choose your preferred audio input & output source.
- Configure microphone audio sensitivity.
- Choose between half- and full-duplex transmission (note: half-duplex has better range and stability).**

Simple group texting:

- Broadcast text messages with instant notifications.
- View message history and past activity.

Supplementary features:

- Continues running even in the background or when locked.
- Configure the app to stay awake indefinitely, even in the background.
- Control the app even in the lock screen via the system voice call UI, or hide it entirely.
- View advanced connection details.**
- Specify network addresses to connect to manually.**
- No ads, no tracking, and a generous free trial!

If the above features and specifications are what you’re looking for, try the app today!

*To use extra range via WLAN automatically, Bonjour (mDNS) and LAN connections must be allowed on the network.

**Advanced settings are hidden by default but can be enabled.

== Free-trial policy ==

New users get a free trial with a per-session limit of 15 minutes. You can launch a new session after one ends, which resets the timer, for as many times as you wish.

Once you're satisfied that DirectTalk suits your use case, just make a small one-time purchase to get the full license - no subscriptions!

PSA:

If you wish to test a use case that requires a session length longer than 15 minutes before your purchase, please contact support.

Users of previous versions may claim a discount by keeping the old version installed during the purchase process.

Full license and some features are temporarily unavailable in certain regions.

~ TEXT and VOICE CHAT with your nearby friends with NO INTERNET connection! ~

DirectTalk 2 is a text/call/walkie-talkie app that works *offline*, without sending data over the Internet, unlike others on the App Store!

Just turn on your WiFi radio, and be in range of other devices. All devices on a channel connect effortlessly when nearby, just like Wi-Fi Direct and Bluetooth. When available, it uses your Local Area Network (LAN) as well, and you can leave it running in the background!

NOTE: Please read the specifications carefully - This app transmits data directly using your Wi-Fi antenna. ***WI-FI IS NOT THE INTERNET!*** This means it has limits in areas like range, and does NOT work like Internet-based apps that functions anywhere with an Internet connection.

PSA: DirectTalk was formerly known as Walkie Talkie P2P.


== Requirements ==

For maximum performance, please use the same app version and same OS version. It usually maintains a good performance within 10 meters (33 feet) apart.

Clear line-of-sight in open spaces with no signal interference, together with device models with newer Wi-Fi radio antennas, can increase range - potentially up to 30 meters (100 feet) in perfect scenarios.

These ranges can also be extended via LAN if all users are connected to the same LAN over Wi-Fi access points spread across multiple locations, such as in workplaces.


== Feature Set & Specifications ==

Completely offline & private:

- No connection to the Internet needed.
- No Wi-Fi network nor Cellular connection needed.
- Broadcast to offline public channels, or use an encrypted private channel with a secret password.

Transmit to nearby devices with minimal configuration:

- Choose the same channel, then start talking!
- 10 meters (33 feet) standard range via direct connections.
- Extra range available with unobstructed line-of-sight, low interference and modern antennas.
- Extra range available via WLAN,* e.g., workplaces with multiple Wi-Fi access points.

Multiple microphone activation modes, via:

- Push-to-Talk (PTT): for a traditional walkie talkie experience, or
- Voice Activated (VOX): for a hands-free experience, or
- Raise to Speak: for a phone-call-like experience.

Advanced audio configuration:

- Use Voice Isolation for improved voice quality on supported devices, even in noisy environments.
- Choose your preferred audio input & output source.
- Configure microphone audio sensitivity.
- Choose between half- and full-duplex transmission (note: half-duplex has better range and stability).**

Simple group texting:

- Broadcast text messages with instant notifications.
- View message history and past activity.

Supplementary features:

- Continues running even in the background or when locked.
- Configure the app to stay awake indefinitely, even in the background.
- Control the app even in the lock screen via the system voice call UI, or hide it entirely.
- View advanced connection details.**
- Specify network addresses to connect to manually.**
- No ads, no tracking, and a generous free trial!

If the above features and specifications are what you’re looking for, try the app today!

*To use extra range via WLAN automatically, Bonjour (mDNS) and LAN connections must be allowed on the network.

**Advanced settings are hidden by default but can be enabled.

== Free-trial policy ==

New users get a free trial with a per-session limit of 15 minutes. You can launch a new session after one ends, which resets the timer, for as many times as you wish.

Once you're satisfied that DirectTalk suits your use case, just make a small one-time purchase to get the full license - no subscriptions!

PSA:

If you wish to test a use case that requires a session length longer than 15 minutes before your purchase, please contact support.

Users of previous versions may claim a discount by keeping the old version installed during the purchase process.

Full license and some features are temporarily unavailable in certain regions.

Looking for a Walkie Talkie app that works *offline* without sending data over the Internet, unlike other similar apps on the App Store?

Say hello to DirectTalk 2! (formerly Walkie Talkie P2P)

It works as long as you have your WiFi radio on, and within range of other devices. All devices on a channel connect effortlessly when nearby, similar to Wi-Fi Direct and Bluetooth. When available, it also utilizes your Local Area Network (LAN). You can even leave it running in the background!

NOTE: Please read the specifications carefully - This app transmits data directly using your Wi-Fi antenna. ***WI-FI IS NOT THE INTERNET!*** This means it has limits in areas like range, and does NOT work like Internet-based Walkie Talkie apps that can function anywhere with an Internet connection.



== Requirements ==

For maximum performance, this app requires all users to have the same app version and same OS version.

It usually maintains a good performance within 10 meters (33 feet) apart with no obstructions, such as very thick concrete walls, or interference from other electronics like a microwave.

However, these ranges can still be extended via LAN if all users are connected to the same LAN over Wi-Fi access points spread across multiple locations.

Alternatively, clear line-of-sight in open spaces with no signal interference, together with device models with newer Wi-Fi radio antennas, can also increase range - potentially up to 30 meters (100 feet) in perfect scenarios.



== Feature Set & Specifications ==

Completely offline & private:

- No connection to the Internet needed.
- No Wi-Fi network nor Cellular connection needed.
- Broadcast to offline public channels, or use an encrypted private channel with a secret password.

Transmit to nearby devices with minimal configuration:

- Choose the same channel, then start talking!
- 10 meters (33 feet) standard range via peer-to-peer connections set to half-duplex mode.
- Extra range available with unobstructed line-of-sight, low interference and modern antennas.
- Extra range available via WLAN,* e.g., workplaces with multiple Wi-Fi access points.

Multiple microphone activation modes, via:

- Push-to-Talk (PTT): for a traditional walkie talkie experience, or
- Voice Activated (VOX): for a hands-free experience, or
- Raise to Speak: for a phone-call-like experience.

Advanced audio configuration:

- Use Voice Isolation for improved voice quality on supported devices, even in noisy environments.
- Choose your preferred audio input & output source.
- Configure microphone audio sensitivity (min. activation dB).
- Choose between half-duplex and full-duplex transmission (note: half-duplex has better range and stability).

Supplementary features:

- Broadcast text messages.
- Continues running even in the background or when locked.
- Option to configure the app to stay awake indefinitely without active connections, even in the background.
- Control the app even in the lock screen via the iOS/iPadOS voice call UI, or hide the UI entirely.
- View advanced connection details.
- Specify network addresses to connect to manually.
- No ads, no tracking, and a generous free trial!

If the above features and specifications are what you’re looking for, try the app today!

*To use extra range via WLAN automatically, Bonjour (mDNS) and LAN connections must be allowed on the network.



== Free-trial policy ==

New users get a free trial with a per-session limit of 15 minutes. You can launch a new session after one ends, which resets the timer, for as many times as you wish.

Once you're satisfied that DirectTalk suits your use case, just make a small one-time purchase to get the full license - no subscriptions!

PSA:

If you wish to test a use case that requires a session length longer than 15 minutes before your purchase, please contact customer support.

Users of the previous version of the app may claim a discounted license upgrade by keeping the old version installed during the purchase process.

Looking for a Walkie Talkie app that works *offline* without sending data over the Internet, unlike other similar apps on the App Store?

Say hello to DirectTalk 2! (formerly Walkie Talkie P2P)

It works as long as you have your WiFi radio on, and within range of other devices. All devices on a channel connect effortlessly via peer-to-peer technology (similar to Wi-Fi Direct or Bluetooth), or via your Local Area Network (LAN). You can even leave it running in the background!

NOTE: Please read the specifications carefully - This app transmits data directly using your Wi-Fi antenna. ***WI-FI IS NOT THE INTERNET!*** This means it has limits in areas like range, and does NOT work like Internet-based Walkie Talkie apps that can function anywhere with an Internet connection.



== Requirements ==

For maximum performance, this app requires all users to have the same app version and same OS version.

It usually maintains a good performance within 10 meters (33 feet) apart with no obstructions, such as very thick concrete walls, or interference from other electronics like a microwave.

However, these ranges can still be extended via LAN if all users are connected to the same LAN over Wi-Fi access points spread across multiple locations.

Alternatively, clear line-of-sight in open spaces with no signal interference, together with device models with newer Wi-Fi radio antennas, can also increase range - potentially up to 30 meters (100 feet) in perfect scenarios.



== Feature Set & Specifications ==

Completely offline & private:

- No connection to the Internet needed.
- No Wi-Fi network nor Cellular connection needed.
- Broadcast to offline public channels, or use an encrypted private channel with a secret password.

Transmit to nearby devices with minimal configuration:

- Choose the same channel, then start talking!
- 10 meters (33 feet) standard range via peer-to-peer connections set to half-duplex mode.
- Extra range available with unobstructed line-of-sight, low interference and modern antennas.
- Extra range available via WLAN,* e.g., workplaces with multiple Wi-Fi access points.

Multiple microphone activation modes, via:

- Push-to-Talk (PTT): for a traditional walkie talkie experience, or
- Voice Activated (VOX): for a hands-free experience, or
- Raise to Speak: for a phone-call-like experience.

Advanced audio configuration:

- Use Voice Isolation for improved voice quality on supported devices, even in noisy environments.
- Choose your preferred audio input & output source.
- Configure microphone audio sensitivity (min. activation dB).
- Choose between half-duplex and full-duplex transmission (note: half-duplex has better range and stability).

Supplementary features:

- Broadcast text messages.
- Continues running even in the background or when locked.
- Option to configure the app to stay awake indefinitely without active connections, even in the background.
- Control the app even in the lock screen via the iOS/iPadOS voice call UI, or hide the UI entirely.
- View advanced connection details.
- Specify network addresses to connect to manually.
- No ads, no tracking, and a generous free trial!

If the above features and specifications are what you’re looking for, try the app today!

*To use extra range via WLAN automatically, Bonjour (mDNS) and LAN connections must be allowed on the network.



== Free-trial policy ==

New users get a free trial with a per-session limit of 15 minutes. You can launch a new session after one ends, which resets the timer, for as many times as you wish.

Once you're satisfied that DirectTalk suits your use case, just make a small one-time purchase to get the full license - no subscriptions!

PSA:

If you wish to test a use case that requires a session length longer than 15 minutes before your purchase, please contact customer support.

Users of the previous version of the app may claim a discounted license upgrade by keeping the old version installed during the purchase process.