七麦数据

SHUTR Connect™
The SHUTR Connect app allows you to configure the SHUTR electric sliding damper and all other components of the SHUTR® family of products. The products are primarily designed to improve the efficiency of dust collection systems in professional and semi-professional wood working shops and industry applications. The wireless components use the SHUTR Connect™ protocol to interact in a safe and reliable way.


The components:
• SHUTR Controller (needed to use this app)
• SHUTR Gate, an electric, wireless sliding damper
• SHUTR Sensor, for detecting that a processing machine is turned on
• SHUTR Remote, a remote control


The wireless components are easy to install, no specific knowledge required. No network setup needed. Once installed, gates will automatically open and the dust collector will be automatically switched on if a processing machines equipped with a sensor are activated or if a remote is used. This reduces the health hazard for workers and saves energy as the dust collector is only switched on when needed. The SHUTR Gate is an electric sliding damper that complies with the CE/ATEX 114 safety regulations.

The SHUTR Connect app connects over Bluetooth with the SHUTR Controller and lets you combine the different components by pairing them in logical series. The app also provides advanced settings for the components in the SHUTR Connect network:
• Switch ON delay
• Switch OFF delay
• Minimum runtime dust collector
• Minimum OFF time dust collector
• Sensor sensitivity
• OTA firmware updates, and more


More information: https://www.blastgate.com
Contact us at: info@blastgate.com

Privacy policy: https://www.blastgate.com/privacy-policy/
BlastGate.com BV – ©2023. All right reserved.
SHUTR® is a registered trademark.
Specifications may change without prior notice.

SHUTR Connect™
The SHUTR Connect app allows you to configure the SHUTR electric sliding damper and all other components of the SHUTR® family of products. The products are primarily designed to improve the efficiency of dust collection systems in professional and semi-professional wood working shops and industry applications. The wireless components use the SHUTR Connect™ protocol to interact in a safe and reliable way.


The components:
• SHUTR Controller (needed to use this app)
• SHUTR Gate, an electric, wireless sliding damper
• SHUTR Sensor, for detecting that a processing machine is turned on
• SHUTR Remote, a remote control


The wireless components are easy to install, no specific knowledge required. No network setup needed. Once installed, gates will automatically open and the dust collector will be automatically switched on if a processing machines equipped with a sensor are activated or if a remote is used. This reduces the health hazard for workers and saves energy as the dust collector is only switched on when needed. The SHUTR Gate is an electric sliding damper that complies with the CE/ATEX 114 safety regulations.

The SHUTR Connect app connects over Bluetooth with the SHUTR Controller and lets you combine the different components by pairing them in logical series. The app also provides advanced settings for the components in the SHUTR Connect network:
• Switch ON delay
• Switch OFF delay
• Minimum runtime dust collector
• Minimum OFF time dust collector
• Sensor sensitivity
• OTA firmware updates, and more


More information: https://www.blastgate.com
Contact us at: info@blastgate.com

Privacy policy: https://www.blastgate.com/privacy-policy/
BlastGate.com BV – ©2023. All right reserved.
SHUTR® is a registered trademark.
Specifications may change without prior notice.

SHUTR Connect™
The SHUTR Connect app allows you to configure the SHUTR electric sliding damper and all other components of the SHUTR® family of products. The products are primarily designed to improve the efficiency of dust collection systems in professional and semi-professional wood working shops and industry applications. The wireless components use the SHUTR Connect™ protocol to interact in a safe and reliable way.


The components:
• SHUTR Controller (needed to use this app)
• SHUTR Gate, an electric, wireless sliding damper
• SHUTR Sensor, for detecting that a processing machine is turned on
• SHUTR Remote, a remote control


The wireless components are easy to install, no specific knowledge required. No network setup needed. Once installed, gates will automatically open and the dust collector will be automatically switched on if a processing machines equipped with a sensor are activated or if a remote is used. This reduces the health hazard for workers and saves energy as the dust collector is only switched on when needed. The SHUTR Gate is an electric sliding damper that complies with the CE/ATEX 114 safety regulations.

The SHUTR Connect app connects over Bluetooth with the SHUTR Controller and lets you combine the different components by pairing them in logical series. The app also provides advanced settings for the components in the SHUTR Connect network:
• Switch ON delay
• Switch OFF delay
• Minimum runtime dust collector
• Minimum OFF time dust collector
• Sensor sensitivity
• OTA firmware updates, and more


More information: https://www.blastgate.com
Contact us at: info@blastgate.com

Privacy policy: https://www.blastgate.com/privacy-policy/
BlastGate.com BV – ©2023. All right reserved.
SHUTR® is a registered trademark.
Specifications may change without prior notice.

SHUTR Connect™
The SHUTR Connect app allows you to configure the SHUTR electric sliding damper and all other components of the SHUTR® family of products. The products are primarily designed to improve the efficiency of dust collection systems in professional and semi-professional wood working shops and industry applications. The wireless components use the SHUTR Connect™ protocol to interact in a safe and reliable way.


The components:
• SHUTR Controller (needed to use this app)
• SHUTR Gate, an electric, wireless sliding damper
• SHUTR Sensor, for detecting that a processing machine is turned on
• SHUTR Remote, a remote control


The wireless components are easy to install, no specific knowledge required. No network setup needed. Once installed, gates will automatically open and the dust collector will be automatically switched on if a processing machines equipped with a sensor are activated or if a remote is used. This reduces the health hazard for workers and saves energy as the dust collector is only switched on when needed. The SHUTR Gate is an electric sliding damper that complies with the CE/ATEX 114 safety regulations.

The SHUTR Connect app connects over Bluetooth with the SHUTR Controller and lets you combine the different components by pairing them in logical series. The app also provides advanced settings for the components in the SHUTR Connect network:
• Switch ON delay
• Switch OFF delay
• Minimum runtime dust collector
• Minimum OFF time dust collector
• Sensor sensitivity
• OTA firmware updates, and more


More information: https://www.blastgate.com
Contact us at: info@blastgate.com

Privacy policy: https://www.blastgate.com/privacy-policy/
BlastGate.com BV – ©2023. All right reserved.
SHUTR® is a registered trademark.
Specifications may change without prior notice.

SHUTR Connect™
The SHUTR Connect app allows you to configure the SHUTR electric sliding damper and all other components of the SHUTR® family of products. The products are primarily designed to improve the efficiency of dust collection systems in professional and semi-professional wood working shops and industry applications. The wireless components use the SHUTR Connect™ protocol to interact in a safe and reliable way.


The components:
• SHUTR Controller (needed to use this app)
• SHUTR Gate, an electric, wireless sliding damper
• SHUTR Sensor, for detecting that a processing machine is turned on
• SHUTR Remote, a remote control


The wireless components are easy to install, no specific knowledge required. No network setup needed. Once installed, gates will automatically open and the dust collector will be automatically switched on if a processing machines equipped with a sensor are activated or if a remote is used. This reduces the health hazard for workers and saves energy as the dust collector is only switched on when needed. The SHUTR Gate is an electric sliding damper that complies with the CE/ATEX 114 safety regulations.

The SHUTR Connect app connects over Bluetooth with the SHUTR Controller and lets you combine the different components by pairing them in logical series. The app also provides advanced settings for the components in the SHUTR Connect network:
• Switch ON delay
• Switch OFF delay
• Minimum runtime dust collector
• Minimum OFF time dust collector
• Sensor sensitivity
• OTA firmware updates, and more


More information: https://www.blastgate.com
Contact us at: info@blastgate.com

Privacy policy: https://www.blastgate.com/privacy-policy/
BlastGate.com BV – ©2023. All right reserved.
SHUTR® is a registered trademark.
Specifications may change without prior notice.

SHUTR Connect™
The SHUTR Connect app allows you to configure the SHUTR electric sliding damper and all other components of the SHUTR® family of products. The products are primarily designed to improve the efficiency of dust collection systems in professional and semi-professional wood working shops and industry applications. The wireless components use the SHUTR Connect™ protocol to interact in a safe and reliable way.


The components:
• SHUTR Controller (needed to use this app)
• SHUTR Gate, an electric, wireless sliding damper
• SHUTR Sensor, for detecting that a processing machine is turned on
• SHUTR Remote, a remote control


The wireless components are easy to install, no specific knowledge required. No network setup needed. Once installed, gates will automatically open and the dust collector will be automatically switched on if a processing machines equipped with a sensor are activated or if a remote is used. This reduces the health hazard for workers and saves energy as the dust collector is only switched on when needed. The SHUTR Gate is an electric sliding damper that complies with the CE/ATEX 114 safety regulations.

The SHUTR Connect app connects over Bluetooth with the SHUTR Controller and lets you combine the different components by pairing them in logical series. The app also provides advanced settings for the components in the SHUTR Connect network:
• Switch ON delay
• Switch OFF delay
• Minimum runtime dust collector
• Minimum OFF time dust collector
• Sensor sensitivity
• OTA firmware updates, and more


More information: https://www.blastgate.com
Contact us at: info@blastgate.com

Privacy policy: https://www.blastgate.com/privacy-policy/
BlastGate.com BV – ©2023. All right reserved.
SHUTR® is a registered trademark.
Specifications may change without prior notice.

SHUTR Connect™
The SHUTR Connect app allows you to configure the SHUTR electric sliding damper and all other components of the SHUTR® family of products. The products are primarily designed to improve the efficiency of dust collection systems in professional and semi-professional wood working shops and industry applications. The wireless components use the SHUTR Connect™ protocol to interact in a safe and reliable way.


The components:
• SHUTR Controller (needed to use this app)
• SHUTR Gate, an electric, wireless sliding damper
• SHUTR Sensor, for detecting that a processing machine is turned on
• SHUTR Remote, a remote control


The wireless components are easy to install, no specific knowledge required. No network setup needed. Once installed, gates will automatically open and the dust collector will be automatically switched on if a processing machines equipped with a sensor are activated or if a remote is used. This reduces the health hazard for workers and saves energy as the dust collector is only switched on when needed. The SHUTR Gate is an electric sliding damper that complies with the CE/ATEX 114 safety regulations.

The SHUTR Connect app connects over Bluetooth with the SHUTR Controller and lets you combine the different components by pairing them in logical series. The app also provides advanced settings for the components in the SHUTR Connect network:
• Switch ON delay
• Switch OFF delay
• Minimum runtime dust collector
• Minimum OFF time dust collector
• Sensor sensitivity
• OTA firmware updates, and more


More information: https://www.blastgate.com
Contact us at: info@blastgate.com

Privacy policy: https://www.blastgate.com/privacy-policy/
BlastGate.com BV – ©2023. All right reserved.
SHUTR® is a registered trademark.
Specifications may change without prior notice.

SHUTR Connect™
The SHUTR Connect app allows you to configure the SHUTR electric sliding damper and all other components of the SHUTR® family of products. The products are primarily designed to improve the efficiency of dust collection systems in professional and semi-professional wood working shops and industry applications. The wireless components use the SHUTR Connect™ protocol to interact in a safe and reliable way.


The components:
• SHUTR Controller (needed to use this app)
• SHUTR Gate, an electric, wireless sliding damper
• SHUTR Sensor, for detecting that a processing machine is turned on
• SHUTR Remote, a remote control


The wireless components are easy to install, no specific knowledge required. No network setup needed. Once installed, gates will automatically open and the dust collector will be automatically switched on if a processing machines equipped with a sensor are activated or if a remote is used. This reduces the health hazard for workers and saves energy as the dust collector is only switched on when needed. The SHUTR Gate is an electric sliding damper that complies with the CE/ATEX 114 safety regulations.

The SHUTR Connect app connects over Bluetooth with the SHUTR Controller and lets you combine the different components by pairing them in logical series. The app also provides advanced settings for the components in the SHUTR Connect network:
• Switch ON delay
• Switch OFF delay
• Minimum runtime dust collector
• Minimum OFF time dust collector
• Sensor sensitivity
• OTA firmware updates, and more


More information: https://www.blastgate.com
Contact us at: info@blastgate.com

Privacy policy: https://www.blastgate.com/privacy-policy/
BlastGate.com BV – ©2023. All right reserved.
SHUTR® is a registered trademark.
Specifications may change without prior notice.

SHUTR Connect™
The SHUTR Connect app allows you to configure the SHUTR electric sliding damper and all other components of the SHUTR® family of products. The products are primarily designed to improve the efficiency of dust collection systems in professional and semi-professional wood working shops and industry applications. The wireless components use the SHUTR Connect™ protocol to interact in a safe and reliable way.


The components:
• SHUTR Controller (needed to use this app)
• SHUTR Gate, an electric, wireless sliding damper
• SHUTR Sensor, for detecting that a processing machine is turned on
• SHUTR Remote, a remote control


The wireless components are easy to install, no specific knowledge required. No network setup needed. Once installed, gates will automatically open and the dust collector will be automatically switched on if a processing machines equipped with a sensor are activated or if a remote is used. This reduces the health hazard for workers and saves energy as the dust collector is only switched on when needed. The SHUTR Gate is an electric sliding damper that complies with the CE/ATEX 114 safety regulations.

The SHUTR Connect app connects over Bluetooth with the SHUTR Controller and lets you combine the different components by pairing them in logical series. The app also provides advanced settings for the components in the SHUTR Connect network:
• Switch ON delay
• Switch OFF delay
• Minimum runtime dust collector
• Minimum OFF time dust collector
• Sensor sensitivity
• OTA firmware updates, and more


More information: https://www.blastgate.com
Contact us at: info@blastgate.com

Privacy policy: https://www.blastgate.com/privacy-policy/
BlastGate.com BV – ©2023. All right reserved.
SHUTR® is a registered trademark.
Specifications may change without prior notice.

SHUTR Connect™
The SHUTR Connect app allows you to configure the SHUTR electric sliding damper and all other components of the SHUTR® family of products. The products are primarily designed to improve the efficiency of dust collection systems in professional and semi-professional wood working shops and industry applications. The wireless components use the SHUTR Connect™ protocol to interact in a safe and reliable way.


The components:
• SHUTR Controller (needed to use this app)
• SHUTR Gate, an electric, wireless sliding damper
• SHUTR Sensor, for detecting that a processing machine is turned on
• SHUTR Remote, a remote control


The wireless components are easy to install, no specific knowledge required. No network setup needed. Once installed, gates will automatically open and the dust collector will be automatically switched on if a processing machines equipped with a sensor are activated or if a remote is used. This reduces the health hazard for workers and saves energy as the dust collector is only switched on when needed. The SHUTR Gate is an electric sliding damper that complies with the CE/ATEX 114 safety regulations.

The SHUTR Connect app connects over Bluetooth with the SHUTR Controller and lets you combine the different components by pairing them in logical series. The app also provides advanced settings for the components in the SHUTR Connect network:
• Switch ON delay
• Switch OFF delay
• Minimum runtime dust collector
• Minimum OFF time dust collector
• Sensor sensitivity
• OTA firmware updates, and more


More information: https://www.blastgate.com
Contact us at: info@blastgate.com

Privacy policy: https://www.blastgate.com/privacy-policy/
BlastGate.com BV – ©2023. All right reserved.
SHUTR® is a registered trademark.
Specifications may change without prior notice.