七麦数据

Software Defined Radio Client for Icom Transceivers and your iPad

SDR-Control is a full featured iPad App to operate your Icom Transceiver at home or from around the world without additional Hard- or Software.

Important: This App requires one of the following Icom Transceivers: IC-705, IC-7610, IC-9700, IC-7760 or the IC-R8600 Receiver

FACTS AND FEATURES:

■ Compatible to iOS 17 and newer

■ Compatible to any new Silicon M or older CPUs

■ Complete operation of your Icom Transceiver in all modes

■ Use the App local or to remote access of your Transceiver from any place without additional Hard- or Software

■ Dual VFO support (single Waterfall)

■ DualWatch support (Audio from both VFOs at the same time)

■ Logbook with auto logging, ADIF Im-/Export

■ UDP Log submission when using external logging software

■ Integrated full featured FT8 / FT4 Tool

■ Integrated SSTV receiver (NEW)

■ Integrated CW Decoder (NEW)

■ Integrated CW Keyer

■ DX-Cluster integration

■ Spots (from FT8, DX-Cluster) will be displayed in Waterfall

■ Band limits and Band-Modes will be displayed in Waterfall

■ Call sign lookup integrated

■ Displays Calls on Map with heading and distance information

■ MIDI Controller support

■ Keyboard shortcuts

■ And much more...

WHAT YOU NEED:

- An Icom IC-705, IC-7610, IC-9700 or IC-7760 Transceiver or IC-R8600 Receiver

- The Transceiver needs to be connected to your Network (WiFi or LAN)

- No USB cable needed or supported

- An iPad that runs at least iOS 17

Find out more here: https://ham-radio-apps.com

Read the Manual: http://go-to.me/sdrcontrol-ios-manual

Software Defined Radio Client for Icom Transceivers and your iPad

SDR-Control is a full featured iPad App to operate your Icom Transceiver at home or from around the world without additional Hard- or Software.

Important: This App requires one of the following Icom Transceivers: IC-705, IC-7610, IC-9700, IC-7760 or the IC-R8600 Receiver

FACTS AND FEATURES:

■ Compatible to iOS 17 and newer

■ Compatible to any new Silicon M or older CPUs

■ Complete operation of your Icom Transceiver in all modes

■ Use the App local or to remote access of your Transceiver from any place without additional Hard- or Software

■ Dual VFO support (single Waterfall)

■ DualWatch support (Audio from both VFOs at the same time)

■ Logbook with auto logging, ADIF Im-/Export

■ UDP Log submission when using external logging software

■ Integrated full featured FT8 / FT4 Tool

■ Integrated SSTV receiver (NEW)

■ Integrated CW Decoder (NEW)

■ Integrated CW Keyer

■ DX-Cluster integration

■ Spots (from FT8, DX-Cluster) will be displayed in Waterfall

■ Band limits and Band-Modes will be displayed in Waterfall

■ Call sign lookup integrated

■ Displays Calls on Map with heading and distance information

■ MIDI Controller support

■ Keyboard shortcuts

■ And much more...

WHAT YOU NEED:

- An Icom IC-705, IC-7610, IC-9700 or IC-7760 Transceiver or IC-R8600 Receiver

- The Transceiver needs to be connected to your Network (WiFi or LAN)

- No USB cable needed or supported

- An iPad that runs at least iOS 17

Find out more here: https://ham-radio-apps.com

Read the Manual: http://go-to.me/sdrcontrol-ios-manual

Software Defined Radio Client for Icom Transceivers and your iPad

SDR-Control is a full featured iPad App to operate your Icom Transceiver at home or from around the world without additional Hard- or Software.

Important: This App requires one of the following Icom Transceivers: IC-705, IC-7610, IC-9700, IC-7760 or the IC-R8600 Receiver

FACTS AND FEATURES:

■ Compatible to iOS 17 and newer

■ Compatible to any new Silicon M or older CPUs

■ Complete operation of your Icom Transceiver in all modes

■ Use the App local or to remote access of your Transceiver from any place without additional Hard- or Software

■ Dual VFO support (single Waterfall)

■ DualWatch support (Audio from both VFOs at the same time)

■ Logbook with auto logging, ADIF Im-/Export

■ UDP Log submission when using external logging software

■ Integrated full featured FT8 / FT4 Tool

■ Integrated SSTV receiver (NEW)

■ Integrated CW Decoder (NEW)

■ Integrated CW Keyer

■ DX-Cluster integration

■ Spots (from FT8, DX-Cluster) will be displayed in Waterfall

■ Band limits and Band-Modes will be displayed in Waterfall

■ Call sign lookup integrated

■ Displays Calls on Map with heading and distance information

■ MIDI Controller support

■ Keyboard shortcuts

■ And much more...

WHAT YOU NEED:

- An Icom IC-705, IC-7610, IC-9700 or IC-7760 Transceiver or IC-R8600 Receiver

- The Transceiver needs to be connected to your Network (WiFi or LAN)

- No USB cable needed or supported

- An iPad that runs at least iOS 17

Find out more here: https://ham-radio-apps.com

Read the Manual: http://go-to.me/sdrcontrol-ios-manual

Software Defined Radio Client for Icom Transceivers and your iPad

SDR-Control is a full featured iPad App to operate your Icom Transceiver at home or from around the world without additional Hard- or Software.

Important: This App requires one of the following Icom Transceivers: IC-705, IC-7610, IC-9700, IC-7760 or the IC-R8600 Receiver

FACTS AND FEATURES:

■ Compatible to iOS 17 and newer

■ Compatible to any new Silicon M or older CPUs

■ Complete operation of your Icom Transceiver in all modes

■ Use the App local or to remote access of your Transceiver from any place without additional Hard- or Software

■ Dual VFO support (single Waterfall)

■ DualWatch support (Audio from both VFOs at the same time)

■ Logbook with auto logging, ADIF Im-/Export

■ UDP Log submission when using external logging software

■ Integrated full featured FT8 / FT4 Tool

■ Integrated SSTV receiver (NEW)

■ Integrated CW Decoder (NEW)

■ Integrated CW Keyer

■ DX-Cluster integration

■ Spots (from FT8, DX-Cluster) will be displayed in Waterfall

■ Band limits and Band-Modes will be displayed in Waterfall

■ Call sign lookup integrated

■ Displays Calls on Map with heading and distance information

■ MIDI Controller support

■ Keyboard shortcuts

■ And much more...

WHAT YOU NEED:

- An Icom IC-705, IC-7610, IC-9700 or IC-7760 Transceiver or IC-R8600 Receiver

- The Transceiver needs to be connected to your Network (WiFi or LAN)

- No USB cable needed or supported

- An iPad that runs at least iOS 17

Find out more here: https://ham-radio-apps.com

Read the Manual: http://go-to.me/sdrcontrol-ios-manual

Software Defined Radio Client for Icom Transceivers and your iPad

SDR-Control is a full featured iPad App to operate your Icom Transceiver at home or from around the world without additional Hard- or Software.

Important: This App requires one of the following Icom Transceivers: IC-705, IC-7610, IC-9700, IC-7760 or the IC-R8600 Receiver

FACTS AND FEATURES:

■ Compatible to iOS 17 and newer

■ Compatible to any new Silicon M or older CPUs

■ Complete operation of your Icom Transceiver in all modes

■ Use the App local or to remote access of your Transceiver from any place without additional Hard- or Software

■ Dual VFO support (single Waterfall)

■ DualWatch support (Audio from both VFOs at the same time)

■ Logbook with auto logging, ADIF Im-/Export

■ UDP Log submission when using external logging software

■ Integrated full featured FT8 / FT4 Tool

■ Integrated CW Decoder (new)

■ Integrated CW Keyer

■ DX-Cluster integration

■ Spots (from FT8, DX-Cluster) will be displayed in Waterfall

■ Band limits and Band-Modes will be displayed in Waterfall

■ Call sign lookup integrated

■ Displays Calls on Map with heading and distance information

■ MIDI Controller support

■ Keyboard shortcuts

■ And much more...

WHAT YOU NEED:

- An Icom IC-705, IC-7610, IC-9700 or IC-7760 Transceiver or IC-R8600 Receiver

- The Transceiver needs to be connected to your Network (WiFi or LAN)

- No USB cable needed or supported

- An iPad that runs at least iOS 17

Find out more here: https://ham-radio-apps.com

Read the Manual: http://go-to.me/sdrcontrol-ios-manual

Software Defined Radio Client for Icom Transceivers and your iPad

SDR-Control is a full featured iPad App to operate your Icom Transceiver at home or from around the world without additional Hard- or Software.

Important: This App requires one of the following Icom Transceivers: IC-705, IC-7610, IC-9700, IC-7760 or the IC-R8600 Receiver

FACTS AND FEATURES:

■ Compatible to iOS 17 and newer

■ Compatible to any new Silicon M or older CPUs

■ Complete operation of your Icom Transceiver in all modes

■ Use the App local or to remote access of your Transceiver from any place without additional Hard- or Software

■ Dual VFO support (single Waterfall)

■ DualWatch support (Audio from both VFOs at the same time)

■ Logbook with auto logging, ADIF Im-/Export

■ UDP Log submission when using external logging software

■ Integrated full featured FT8 / FT4 Tool

■ Integrated CW Decoder (new)

■ Integrated CW Keyer

■ DX-Cluster integration

■ Spots (from FT8, DX-Cluster) will be displayed in Waterfall

■ Band limits and Band-Modes will be displayed in Waterfall

■ Call sign lookup integrated

■ Displays Calls on Map with heading and distance information

■ MIDI Controller support

■ Keyboard shortcuts

■ And much more...

WHAT YOU NEED:

- An Icom IC-705, IC-7610, IC-9700 or IC-7760 Transceiver or IC-R8600 Receiver

- The Transceiver needs to be connected to your Network (WiFi or LAN)

- No USB cable needed or supported

- An iPad that runs at least iOS 17

Find out more here: https://ham-radio-apps.com

Read the Manual: http://go-to.me/sdrcontrol-ios-manual

Software Defined Radio Client for Icom Transceivers and your iPad

SDR-Control is a full featured iPad App to operate your Icom Transceiver at home or from around the world without additional Hard- or Software.

Important: This App requires one of the following Icom Transceivers: IC-705, IC-7610, IC-9700, IC-7760 or the IC-R8600 Receiver

FACTS AND FEATURES:

■ Compatible to iOS 17 and newer

■ Compatible to any new Silicon M or older CPUs

■ Complete operation of your Icom Transceiver in all modes

■ Use the App local or to remote access of your Transceiver from any place without additional Hard- or Software

■ Dual VFO support (single Waterfall)

■ DualWatch support (Audio from both VFOs at the same time)

■ Logbook with auto logging, ADIF Im-/Export

■ UDP Log submission when using external logging software

■ Integrated full featured FT8 / FT4 Tool

■ Integrated CW Decoder (new)

■ Integrated CW Keyer

■ DX-Cluster integration

■ Spots (from FT8, DX-Cluster) will be displayed in Waterfall

■ Band limits and Band-Modes will be displayed in Waterfall

■ Call sign lookup integrated

■ Displays Calls on Map with heading and distance information

■ MIDI Controller support

■ Keyboard shortcuts

■ And much more...

WHAT YOU NEED:

- An Icom IC-705, IC-7610, IC-9700 or IC-7760 Transceiver or IC-R8600 Receiver

- The Transceiver needs to be connected to your Network (WiFi or LAN)

- No USB cable needed or supported

- An iPad that runs at least iOS 17

Find out more here: https://ham-radio-apps.com

Read the Manual: http://go-to.me/sdrcontrol-ios-manual

Software Defined Radio Client for Icom Transceivers and your iPad

SDR-Control is a full featured iPad App to operate your Icom Transceiver at home or from around the world without additional Hard- or Software.

Important: This App requires one of the following Icom Transceivers: IC-705, IC-7610, IC-9700 or the IC-R8600 Receiver

FACTS AND FEATURES:

■ Compatible to iOS 16 and newer

■ Compatible to M1, M2 or older CPUs

■ Complete operation of your Icom Transceiver in all modes

■ Use the App local or to remote access of your Transceiver from any place without additional Hard- or Software

■ Dual VFO support (single Waterfall)

■ DualWatch support (Audio from both VFOs at the same time)

■ Logbook with auto logging, ADIF Im-/Export

■ UDP Log submission when using external logging software

■ Integrated full featured FT8 / FT4 Tool

■ Integrated CW Decoder (new)

■ Integrated CW Keyer

■ DX-Cluster integration

■ Spots (from FT8, DX-Cluster) will be displayed in Waterfall

■ Band limits and Band-Modes will be displayed in Waterfall

■ Call sign lookup integrated

■ Displays Calls on Map with heading and distance information

■ MIDI Controller support

■ Keyboard shortcuts

■ And much more...

WHAT YOU NEED:

- An Icom IC-705, IC-7610 or IC-9700 Transceiver or IC-R8600 Receiver

- The Transceiver needs to be connected to your Network (WiFi or LAN)

- No USB cable needed or supported

- An iPad that runs at least iOS 16

Find out more here: https://ham-radio-apps.com

Read the Manual: http://go-to.me/sdrcontrol-ios-manual

Software Defined Radio Client for Icom Transceivers and your iPad

SDR-Control is a full featured iPad App to operate your Icom Transceiver at home or from around the world without additional Hard- or Software.

Important: This App requires one of the following Icom Transceivers: IC-705, IC-7610, IC-9700 or the IC-R8600 Receiver

FACTS AND FEATURES:

■ Compatible to iOS 16 and newer

■ Compatible to M1, M2 or older CPUs

■ Complete operation of your Icom Transceiver in all modes

■ Use the App local or to remote access of your Transceiver from any place without additional Hard- or Software

■ Dual VFO support (single Waterfall)

■ DualWatch support (Audio from both VFOs at the same time)

■ Logbook with auto logging, ADIF Im-/Export

■ UDP Log submission when using external logging software

■ Integrated full featured FT8 / FT4 Tool

■ Integrated CW Decoder (new)

■ Integrated CW Keyer

■ DX-Cluster integration

■ Spots (from FT8, DX-Cluster) will be displayed in Waterfall

■ Band limits and Band-Modes will be displayed in Waterfall

■ Call sign lookup integrated

■ Displays Calls on Map with heading and distance information

■ MIDI Controller support

■ Keyboard shortcuts

■ And much more...

WHAT YOU NEED:

- An Icom IC-705, IC-7610 or IC-9700 Transceiver or IC-R8600 Receiver

- The Transceiver needs to be connected to your Network (WiFi or LAN)

- No USB cable needed or supported

- An iPad that runs at least iOS 16

Find out more here: https://ham-radio-apps.com

Read the Manual: http://go-to.me/sdrcontrol-ios-manual

Software Defined Radio Client for Icom Transceivers and your iPad

SDR-Control is a full featured iPad App to operate your Icom Transceiver at home or from around the world without additional Hard- or Software.

Important: This App requires one of the following Icom Transceivers: IC-705, IC-7610, IC-9700 or the IC-R8600 Receiver

FACTS AND FEATURES:

■ Compatible to iOS 16 and newer

■ Compatible to M1, M2 or older CPUs

■ Complete operation of your Icom Transceiver in all modes

■ Use the App local or to remote access of your Transceiver from any place without additional Hard- or Software

■ Dual VFO support (single Waterfall)

■ DualWatch support (Audio from both VFOs at the same time)

■ Logbook with auto logging, ADIF Im-/Export

■ UDP Log submission when using external logging software

■ Integrated full featured FT8 / FT4 Tool

■ Integrated CW Decoder (new)

■ Integrated CW Keyer

■ DX-Cluster integration

■ Spots (from FT8, DX-Cluster) will be displayed in Waterfall

■ Band limits and Band-Modes will be displayed in Waterfall

■ Call sign lookup integrated

■ Displays Calls on Map with heading and distance information

■ MIDI Controller support

■ Keyboard shortcuts

■ And much more...

WHAT YOU NEED:

- An Icom IC-705, IC-7610 or IC-9700 Transceiver or IC-R8600 Receiver

- The Transceiver needs to be connected to your Network (WiFi or LAN)

- No USB cable needed or supported

- An iPad that runs at least iOS 16

Find out more here: https://ham-radio-apps.com

Read the Manual: http://go-to.me/sdrcontrol-ios-manual