七麦数据

Changelog 2.6.5
= Fixed
- DM3: Crash when connecting under certain conditions
- Si: Crash when connecting under certain conditions

Changelog 2.6.4
= Added
- XTouch: Support for more colors (FW 1.25)

= Fixed
- Set Value and Select Layer action not providing feedback
- Skipping the last channel
- Wing: E88 Comp missing gain and mix
- Yamaha DM: Sync may not work under some conditions
- Yamaha TF: Rf routing not possible

= Changed
- XTouch: LCD Colors are now separate controls per channel

Changelog 2.6.3
= Added
- Actions can be color coded
- Soundcraft Si: Support for latest firmware (mutegroups)
- Wing: Support for latest firmware

= Fixed
- A&H GLD: Main LR pan not working
- A&H SQ: Cue list not cleared when cleared on the mixer
- Save/Load view may select other item after sorting/saving
- 2.6.1 / 2.6.2 Graphic Error in Double Tap Pop Up
- Added button to fader in mixer layout not stored or recalled
- Generic Fader Pitch Control
- XTouch Midi "Output on Value" not saving
- Wing: Crash when connecting to wing with very old firmware
- Wing: Gate / Comp “Hold” number issue

Changelog 2.6.2
= Changed
- X32: Removed support for FW 1.15
= Fixed
- Wing: Personal monitoring not working
- Qu: Personal monitoring not working

Changelog 2.6.1
= Added
- Allow negative percent values in modifier actions

= Fixed
- Timeout detection issues

Changelog 2.6.0
Major changes:
- Yamaha DM7/3 allows now 10+ connections in personal monitoring mode

= Added
- A&H CQ: Output source point
- Fine mode for value popup
- Keep track of last loaded app settings
- Midi: NRPM support
- Percent value support for set value action
- Wing: Send tap width

= Fixed
- A&H CQ: Headphone out routing changed when connecting
- A&H CQ: USB player not showing digital trim adjustment
- A&H Qu (legacy): Can't assign signal source to RF
- A&H Qu (legacy): missing source for the qusb ducker
- A&H SQ: Cue List getting out of Sync
- A&H SQ: FX Returns have no meters in restricted mode
- A&H iLive: Comp layout not updating when changing comp models
- Preset popup not refreshing when importing settings
- Show GROUP BUS state (ON/OFF) in channel strip as X/M32
- Scene list doesn't scroll to selected scene
- Channel strip used in custom layout not appearing again
- MS Scenes doesn't save the monitor source
- Depth order not respected when copying multiple items
- Automix on off status does not sync from console
- Wing: Metering broken when using auto eq/feedback detector
- Wing: Pre/Post button on mains (1-4) not working
- Wing: Gain resets to +22.5dB instead of minimum
- XAIR: Insert mode doesn't save
- XM32: Input Routing for aux blocks wrong name
- Yamaha TF: EQ for Subout missing

Changelog 2.6.1
= Added
- Allow negative percent values in modifier actions

= Fixed
- Timeout detection issues

Changelog 2.6.0
Major changes:
- Yamaha DM7/3 allows now 10+ connections in personal monitoring mode

= Added
- A&H CQ: Output source point
- Fine mode for value popup
- Keep track of last loaded app settings
- Midi: NRPM support
- Percent value support for set value action
- Wing: Send tap width

= Fixed
- A&H CQ: Headphone out routing changed when connecting
- A&H CQ: USB player not showing digital trim adjustment
- A&H Qu (legacy): Can't assign signal source to RF
- A&H Qu (legacy): missing source for the qusb ducker
- A&H SQ: Cue List getting out of Sync
- A&H SQ: FX Returns have no meters in restricted mode
- A&H iLive: Comp layout not updating when changing comp models
- Preset popup not refreshing when importing settings
- Show GROUP BUS state (ON/OFF) in channel strip as X/M32
- Scene list doesn't scroll to selected scene
- Channel strip used in custom layout not appearing again
- MS Scenes doesn't save the monitor source
- Depth order not respected when copying multiple items
- Automix on off status does not sync from console
- Wing: Metering broken when using auto eq/feedback detector
- Wing: Pre/Post button on mains (1-4) not working
- Wing: Gain resets to +22.5dB instead of minimum
- XAIR: Insert mode doesn't save
- XM32: Input Routing for aux blocks wrong name
- Yamaha TF: EQ for Subout missing

Changelog 2.6.0
Major changes:
- Yamaha DM7/3 allows now 10+ connections in personal monitoring mode

= Added
- A&H CQ: Output source point
- Fine mode for value popup
- Keep track of last loaded app settings
- Midi: NRPN support
- Percent value support for set value action
- Wing: Send tap width

= Fixed
- A&H CQ: Headphone out routing changed when connecting
- A&H CQ: USB player not showing digital trim adjustment
- A&H Qu (legacy): Can't assign signal source to RF
- A&H Qu (legacy): missing source for the qusb ducker
- A&H SQ: Cue List getting out of Sync
- A&H SQ: FX Returns have no meters in restricted mode
- A&H iLive: Comp layout not updating when changing comp models
- Preset popup not refreshing when importing settings
- Show GROUP BUS state (ON/OFF) in channel strip as X/M32
- Scene list doesn't scroll to selected scene
- Channel strip used in custom layout not appearing again
- MS Scenes doesn't save the monitor source
- Depth order not respected when copying multiple items
- Automix on off status does not sync from console
- Wing: Metering broken when using auto eq/feedback detector
- Wing: Pre/Post button on mains (1-4) not working
- Wing: Gain resets to +22.5dB instead of minimum
- XAIR: Insert mode doesn't save
- XM32: Input Routing for aux blocks wrong name
- Yamaha TF: EQ for Subout missing

Changelog 2.5.1
= Added
- Yamaha TF Firmware 4.56
- Wing: Add output routing to MS Scenes

= Fixed
- RF view might freeze when adding devices
- Rta source not using channel names
- SLXD: No battery indicator
- Subscription not unlocking RF feature
- Surround pan might freeze when restarting app
- RF Integration QLXD4 shows "Connecting"

= Changed
- Improved settings view

Changelog 2.5.0
= Added
- DM7: Scene list
- Output routing presets
- RF device integration from Shure and Sennheiser
- DM7 Output routing

= Fixed
- A&H Qu (legacy): Channel link indicator not correct
- A&H SQ: Headamp control of stereo channels not always working correctly
- A&H dLive: Copy & paste of gate models doesn't work
- Qu5: Sidechain source not synced correctly
- Sc Ui: Stereo mix changes only left channel in personal monitoring mode
- DM7 Copy/Paste causes app to be out of sync
- Error when editing RTA parameters in GEQ
- Access Cue List actions from a button
- Modifier actions not inheriting state from child actions (buttons would stay visible)
- When loading duplicated app settings, custom themes are sticky
- Using insert on stereo channel which is used by 2 mono channels doesn't clear routing
- Avantis FX not loading correctly on QU-7
- Meters don't hide when layer offset is empty
- Wing: AMM source change not working
- Wing: GEQ RTA not following
- XM32: Snippets 'All' button makes it impossible to save snippet
- XM32: Incorrect unit Damping in FX Hall Reverb
- dLiveV2: Sidechain control not working
- iLive: Crash when using MB3/4 FX

= Changed
- Improved ReGain behavior with non-default compressor models
- Routing labels now have a short form (in channel strip)
- Signal Generator and Talkback UI not scaling well on small devices
- PEQ double click only reset band gain

Changelog 2.4.2
= Added
- A&H Avantis: Cue list
- A&H Qu: Cue list support
- A&H SQ: Bus tap config
- A&H SQ: Cue list
- Spectrogram RTA style (see rta options)

= Fixed
- A&H: Gain in custom actions sometimes controls wrong socket
- SL3: Out of sync after loading a scene
- Sends view not scaling on wide screens
- Unhandled Error on App Settings Save/Load
- Multiband EQ filter curve not at 0dB
- TouchMix: TM30: Aux inputs not working
- TouchMix: Subgroup metering missing
- XM32: Open view: Audio player, no visible feedback
- Crash when trying to purchase subscription

= Changed
- Moved RTA options to "RTA Settings" popup

Changelog 2.4.1
= Added
- A&H Avantis: Cue list
- A&H Qu: Cue list support
- A&H SQ: Bus tap config
- A&H SQ: Cue list
- Spectrogram RTA style (see rta options)

= Fixed
- A&H: Gain in custom actions sometimes controls wrong socket
- SL3: Out of sync after loading a scene
- Sends view not scaling on wide screens
- Unhandled Error on App Settings Save/Load
- Multiband EQ filter curve not at 0dB
- TouchMix: TM30: Aux inputs not working
- TouchMix: Subgroup metering missing
- XM32: Open view: Audio player, no visible feedback

= Changed
- Moved RTA options to "RTA Settings" popup