七麦数据

Multiecuscan is a dealer level diagnostic tool for most models of Fiat, Alfa Romeo and Lancia vehicles and also covers some models of Jeep, Chrysler, Dodge and Suzuki. We also have support for some Ducati bike models. Please visit our web site for a full list of covered models.

The functionality includes:
- Fault code reading and clearing
- Live sensor data
- Live data graphical view
- Actuator testing
- Reset/programming functions
- PROXI configuration
- Service Reminder reset
- Generic EOBD vehicle diagnostics

REQUIREMENTS: An OBD interface is required for connection to vehicles. Without interface it is possible to run connection in "simulation" mode and explore the available functionality. We currently support CANtieCAR v4.x WiFi, CANtieCAR v5.x BLE/WiFi, ELM327 WiFi, OBDLink MX WiFi, OBDLink MX+ Bluetooth, Vgate vLinker WiFi, Vgate vLinker BLE, Vgate vLinker FS/MS Bluetooth interfaces.
Please note that some procedures (like PROXI alignment) depend on the interface speed and may not complete successfully with some interfaces.

IN-APP PURCHASE: The full functionality of the App requires subscription which can be purchased as in-app purchase. Without subscription the App will run with limited functionality.
Please note that the Multiecuscan iOS version is completely separate from Multiecuscan for Windows. The iOS version can be purchased only from the App Store and it is not linked to the license for the Windows' version. It is not possible to transfer license between iOS and Windows.
If you already have purchased the full version on another iOS device then click the RESTORE PURCHASES button to activate the full version.

NOTE: We are a 3rd party supplier and this is not an official factory tool for the above mentioned brands. The brand names are listed only as reference.

Multiecuscan is a dealer level diagnostic tool for most models of Fiat, Alfa Romeo and Lancia vehicles and also covers some models of Jeep, Chrysler, Dodge and Suzuki. We also have support for some Ducati bike models. Please visit our web site for a full list of covered models.

The functionality includes:
- Fault code reading and clearing
- Live sensor data
- Live data graphical view
- Actuator testing
- Reset/programming functions
- PROXI configuration
- Service Reminder reset
- Generic EOBD vehicle diagnostics

REQUIREMENTS: An OBD interface is required for connection to vehicles. Without interface it is possible to run connection in "simulation" mode and explore the available functionality. We currently support CANtieCAR v4.x WiFi, CANtieCAR v5.x BLE/WiFi, ELM327 WiFi, OBDLink MX WiFi, OBDLink MX+ Bluetooth, Vgate vLinker WiFi, Vgate vLinker BLE, Vgate vLinker FS/MS Bluetooth interfaces.
Please note that some procedures (like PROXI alignment) depend on the interface speed and may not complete successfully with some interfaces.

IN-APP PURCHASE: The full functionality of the App requires subscription which can be purchased as in-app purchase. Without subscription the App will run with limited functionality.
Please note that the Multiecuscan iOS version is completely separate from Multiecuscan for Windows. The iOS version can be purchased only from the App Store and it is not linked to the license for the Windows' version. It is not possible to transfer license between iOS and Windows.
If you already have purchased the full version on another iOS device then click the RESTORE PURCHASES button to activate the full version.

NOTE: We are a 3rd party supplier and this is not an official factory tool for the above mentioned brands. The brand names are listed only as reference.

Multiecuscan is a dealer level diagnostic tool for most models of Fiat, Alfa Romeo and Lancia vehicles and also covers some models of Jeep, Chrysler, Dodge and Suzuki. We also have support for some Ducati bike models. Please visit our web site for a full list of covered models.

The functionality includes:
- Fault code reading and clearing
- Live sensor data
- Live data graphical view
- Actuator testing
- Reset/programming functions
- PROXI configuration
- Service Reminder reset
- Generic EOBD vehicle diagnostics

REQUIREMENTS: An OBD interface is required for connection to vehicles. Without interface it is possible to run connection in "simulation" mode and explore the available functionality. We currently support CANtieCAR v4.x WiFi, CANtieCAR v5.x BLE/WiFi, ELM327 WiFi, OBDLink MX WiFi, OBDLink MX+ Bluetooth, Vgate vLinker WiFi, Vgate vLinker BLE interfaces.
Please note that some procedures (like PROXI alignment) depend on the interface speed and may not complete successfully with some interfaces.

IN-APP PURCHASE: The full functionality of the App requires subscription which can be purchased as in-app purchase. Without subscription the App will run with limited functionality.
Please note that the Multiecuscan iOS version is completely separate from Multiecuscan for Windows. The iOS version can be purchased only from the App Store and it is not linked to the license for the Windows' version. It is not possible to transfer license between iOS and Windows.
If you already have purchased the full version on another iOS device then click the RESTORE PURCHASES button to activate the full version.

NOTE: We are a 3rd party supplier and this is not an official factory tool for the above mentioned brands. The brand names are listed only as reference.

Multiecuscan is a dealer level diagnostic tool for most models of Fiat, Alfa Romeo and Lancia vehicles and also covers some models of Jeep, Chrysler, Dodge and Suzuki. We also have support for some Ducati bike models. Please visit our web site for a full list of covered models.

The functionality includes:
- Fault code reading and clearing
- Live sensor data
- Live data graphical view
- Actuator testing
- Reset/programming functions
- PROXI configuration
- Service Reminder reset
- Generic EOBD vehicle diagnostics

REQUIREMENTS: An OBD interface is required for connection to vehicles. Without interface it is possible to run connection in "simulation" mode and explore the available functionality. We currently support CANtieCAR v4.x WiFi, CANtieCAR v5.x BLE/WiFi, ELM327 WiFi, OBDLink MX WiFi, OBDLink MX+ Bluetooth, Vgate WiFi, Vgate BLE interfaces.
Please note that some procedures (like PROXI alignment) depend on the interface speed and may not complete successfully with some interfaces.

IN-APP PURCHASE: The full functionality of the App requires subscription which can be purchased as in-app purchase. Without subscription the App will run with limited functionality.
Please note that the Multiecuscan iOS version is completely separate from Multiecuscan for Windows. The iOS version can be purchased only from the App Store and it is not linked to the license for the Windows' version. It is not possible to transfer license between iOS and Windows.
If you already have purchased the full version on another iOS device then click the RESTORE PURCHASES button to activate the full version.

NOTE: We are a 3rd party supplier and this is not an official factory tool for the above mentioned brands. The brand names are listed only as reference.

Multiecuscan is a dealer level diagnostic tool for most models of Fiat, Alfa Romeo and Lancia vehicles and also covers some models of Jeep, Chrysler, Dodge and Suzuki. We also have support for some Ducati bike models. Please visit our web site for a full list of covered models.

The functionality includes:
- Fault code reading and clearing
- Live sensor data
- Live data graphical view
- Actuator testing
- Reset/programming functions
- PROXI configuration
- Service Reminder reset
- Generic EOBD vehicle diagnostics

REQUIREMENTS: An OBD interface is required for connection to vehicles. Without interface it is possible to run connection in "simulation" mode and explore the available functionality. We currently support CANtieCAR v4.x WiFi, CANtieCAR v5.x BLE/WiFi, ELM327 WiFi, OBDLink MX WiFi, OBDLink MX+ Bluetooth, Vgate WiFi, Vgate BLE interfaces.
Please note that some procedures (like PROXI alignment) depend on the interface speed and may not complete successfully with some interfaces.

IN-APP PURCHASE: The full functionality of the App requires subscription which can be purchased as in-app purchase. Without subscription the App will run with limited functionality.
Please note that the Multiecuscan iOS version is completely separate from Multiecuscan for Windows. The iOS version can be purchased only from the App Store and it is not linked to the license for the Windows' version. It is not possible to transfer license between iOS and Windows.
If you already have purchased the full version on another iOS device then click the RESTORE PURCHASES button to activate the full version.

NOTE: We are a 3rd party supplier and this is not an official factory tool for the above mentioned brands. The brand names are listed only as reference.

Multiecuscan is a dealer level diagnostic tool for most models of Fiat, Alfa Romeo and Lancia vehicles and also covers some models of Jeep, Chrysler, Dodge and Suzuki. Please visit our web site for a full list of covered models.

The functionality includes:
- Fault code reading and clearing
- Live sensor data
- Live data graphical view
- Actuator testing
- Reset/programming functions
- PROXI configuration
- Service Reminder reset
- Generic EOBD vehicle diagnostics

REQUIREMENTS: An OBD interface is required for connection to vehicles. Without interface it is possible to run connection in "simulation" mode and explore the available functionality. We currently support CANtieCAR WiFi, ELM327 WiFi, OBDLink MX WiFi, OBDLink MX+ Bluetooth interfaces.
Please note that some procedures (like PROXI alignment) depend on the interface speed and may not complete successfully with some ELM327 interfaces.

IN-APP PURCHASE: The full functionality of the App requires subscription which can be purchased as in-app purchase. Without subscription the App will run with limited functionality.
Please note that the Multiecuscan iOS version is completely separate from Multiecuscan for Windows. The iOS version can be purchased only from the App Store and it is not linked to the license for the Windows' version. It is not possible to transfer license between iOS and Windows.
If you already have purchased the full version on another iOS device then click the RESTORE PURCHASES button to activate the full version.

NOTE: We are a 3rd party supplier and this is not an official factory tool for the above mentioned brands. The brand names are listed only as reference.

Multiecuscan is a dealer level diagnostic tool for most models of Fiat, Alfa Romeo and Lancia vehicles and also covers some models of Jeep, Chrysler, Dodge and Suzuki. Please visit our web site for a full list of covered models.

The functionality includes:
- Fault code reading and clearing
- Live sensor data
- Live data graphical view
- Actuator testing
- Reset/programming functions
- PROXI configuration
- Service Reminder reset
- Generic EOBD vehicle diagnostics

REQUIREMENTS: An OBD interface is required for connection to vehicles. Without interface it is possible to run connection in "simulation" mode and explore the available functionality. We currently support CANtieCAR WiFi, ELM327 WiFi, OBDLink MX WiFi, OBDLink MX+ Bluetooth interfaces.
Please note that some procedures (like PROXI alignment) depend on the interface speed and may not complete successfully with some ELM327 interfaces.

IN-APP PURCHASE: The full functionality of the App requires subscription which can be purchased as in-app purchase. Without subscription the App will run with limited functionality.
Please note that the Multiecuscan iOS version is completely separate from Multiecuscan for Windows. The iOS version can be purchased only from the App Store and it is not linked to the license for the Windows' version. It is not possible to transfer license between iOS and Windows.
If you already have purchased the full version on another iOS device then click the RESTORE PURCHASES button to activate the full version.

NOTE: We are a 3rd party supplier and this is not an official factory tool for the above mentioned brands. The brand names are listed only as reference.

Multiecuscan is a dealer level diagnostic tool for most models of Fiat, Alfa Romeo and Lancia vehicles and also covers some models of Jeep, Chrysler, Dodge and Suzuki. Please visit our web site for a full list of covered models.

The functionality includes:
- Fault code reading and clearing
- Live sensor data
- Live data graphical view
- Actuator testing
- Reset/programming functions
- PROXI configuration
- Service Reminder reset

REQUIREMENTS: An OBD interface is required for connection to vehicles. Without interface it is possible to run connection in "simulation" mode and explore the available functionality. We currently support CANtieCAR WiFi, ELM327 WiFi, OBDLink MX WiFi, OBDLink MX+ Bluetooth interfaces.
Please note that some procedures (like PROXI alignment) depend on the interface speed and may not complete successfully with some ELM327 interfaces.

IN-APP PURCHASE: The full functionality of the App requires subscription which can be purchased as in-app purchase. Without subscription the App will run with limited functionality.
Please note that the Multiecuscan iOS version is completely separate from Multiecuscan for Windows. The iOS version can be purchased only from the App Store and it is not linked to the license for the Windows' version. It is not possible to transfer license between iOS and Windows.
If you already have purchased the full version on another iOS device then click the RESTORE PURCHASES button to activate the full version.

NOTE: We are a 3rd party supplier and this is not an official factory tool for the above mentioned brands. The brand names are listed only as reference.

Multiecuscan is a dealer level diagnostic tool for most models of Fiat, Alfa Romeo and Lancia vehicles and also covers some models of Jeep, Chrysler, Dodge and Suzuki. Please visit our web site for a full list of covered models.

The functionality includes:
- Fault code reading and clearing
- Live sensor data
- Live data graphical view
- Actuator testing
- Reset/programming functions
- PROXI configuration
- Service Reminder reset

REQUIREMENTS: An OBD interface is required for connection to vehicles. Without interface it is possible to run connection in "simulation" mode and explore the available functionality. We currently support CANtieCAR WiFi, ELM327 WiFi, OBDLink MX WiFi, OBDLink MX+ Bluetooth interfaces.
Please note that some procedures (like PROXI alignment) depend on the interface speed and may not complete successfully with some ELM327 interfaces.

IN-APP PURCHASE: The full functionality of the App requires subscription which can be purchased as in-app purchase. Without subscription the App will run with limited functionality.
Please note that the Multiecuscan iOS version is completely separate from Multiecuscan for Windows. The iOS version can be purchased only from the App Store and it is not linked to the license for the Windows' version. It is not possible to transfer license between iOS and Windows.
If you already have purchased the full version on another iOS device then click the RESTORE PURCHASES button to activate the full version.

NOTE: We are a 3rd party supplier and this is not an official factory tool for the above mentioned brands. The brand names are listed only as reference.