关联应用
SmartSDR™ - FlexRadio Systems®
Official SDR Client
开发者: Marcus Roskosch
中国
版本统计
16天17小时
最新版本上线距今
13
近1年版本更新次数
2016-08-05
全球最早版本上线日期
版本记录
版本: 7.0.72
版本更新日期
2025-07-06
SmartSDR™ - FlexRadio Systems®
Official SDR Client
更新日志
This update contains the following changes and improvements:
◉ Improved POTA Tool accuracy from KHz to Hz
◉ A space character left in the Logbook Search entry will now no longer show an empty logbook
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE应用描述
Official FlexRadio Systems® Client - NOW: All-Inclusive, no In-App Purchase!
SmartSDR is a full featured radio client that enables your iPad or iPhone to operate your FlexRadio device.
It is fully compatible to SmartSDR v1, v2 (including SmartLink) and v3 (including MultiFlex and SmartControl).
Please note: This App requires a FlexRadio Systems® Series 6000 or 8000 Software Defined Radio (SDR) Device.
FACTS AND FEATURES:
SmartSDR offers almost all features of SmartSDR for Windows such as:
■ Supports FT8 and FT4 (iPad and iPhone Max, Firmware 2 required)
■ Included CW Decoder and keyer
■ Weather Fax (HF-Fax) Decoder
■ Creation, maintenance of Slices, TNFs, Filters
■ Unlimited number of Slices, Panadapters (limited only by radio model)
■ CWX support including Sidetone and live send mode
■ Software Paddle or Straight-Key support
■ Maintain all Radio, Slice and Panadapter settings
■ Support for Memories
■ Profiles integration (TX, Microphone and Global)
■ Audio settings supported including equalizers
■ Support for TX Settings like Power including all Tuning features
■ Transverter support
■ SmartLink™ remote access
■ APD / SmartSignal™ support
■ MultiFlex™ support
■ SmartControl support
■ HomeKit support to control radio, antenna switches etc. remotely
■ Direct support for Power Genius XL (PGXL), Tuner Genius (TGXL), Antenna Genius (AGXL) and Rotator Genius (RGXL) local and remote
For HomeKit, you can use any Power Plug or Switch that are HomeKit compatible.
In addition to SmartSDR for Windows, this App offers these features:
■ Band limits and Band maps and modes will be displayed inside the Pan adapter
■ DX Cluster support which displays spots directly inside the Pan adapter
■ Graphical tuning knob for easy and exact frequency selection.
■ Various additional minor bells and whistles such as easy TNF maintenance,
■ Direct Bandwidth selection, Split Mode, instant Memory creation and more.
■ Device logging and device parameter monitoring (e.g. PA Temperature etc.)
■ Logbook integration with ADIF Im- and Export
■ Support for two Bluetooth and USB Controllers
■ Voice Macro recording and playback
There are just a few limitations compared to SmartSDR for Windows which are:
- Only one Panadapter visible at the same time.
- Diversity is not implemented.
WHAT YOU NEED:
- A FlexRadio Systems® FLEX-6000 or 8000 series radio
- An iPhone or iPad that runs at least iOS 16
NETWORK REQUIREMENTS:
To run this App at your home, nothing else but a regular WiFi connection is needed that can access your FLEX Radio. You can immediately start using the App.
For Remote operation via SmartLink™ a Version 2 License is required for your Radio.
The App supports Splitscreen Multitasking on the newer iPads so you can run SmartSDR in split mode parallel to your browser, Email software or any other App.
SUPPORTED SDR HARDWARE:
FLEX-6300, FLEX-6400, FLEX-6400M, FLEX-6500, FLEX-6600, FLEX-6600M, FLEX-6700,FLEX-8400, FLEX-8400M, FLEX-8600, FLEX-8600M
Find out more here: https://ham-radio-apps.com
Read the Manual: https://go-to.me/smartsdr-manual版本: 7.0.71
版本更新日期
2025-06-24
SmartSDR™ - FlexRadio Systems®
Official SDR Client
更新日志
This update contains the following changes and improvements:
◉ Fixed an issue where the waterfall stops when switching the Global Profile
◉ Fixed a crash when selecting the bottom row of the Radio Controls Panel
◉ Fixed an issue with POTA Spots
◉ Added support for Two Tone Tuning (firmware 3.9 required) under Settings and Transmit
◉ Under Settings and Spots, it is now possible to clear all FlexRadio spots of the connected Radio
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE应用描述
Official FlexRadio Systems® Client - NOW: All-Inclusive, no In-App Purchase!
SmartSDR is a full featured radio client that enables your iPad or iPhone to operate your FlexRadio device.
It is fully compatible to SmartSDR v1, v2 (including SmartLink) and v3 (including MultiFlex and SmartControl).
Please note: This App requires a FlexRadio Systems® Series 6000 or 8000 Software Defined Radio (SDR) Device.
FACTS AND FEATURES:
SmartSDR offers almost all features of SmartSDR for Windows such as:
■ Supports FT8 and FT4 (iPad and iPhone Max, Firmware 2 required)
■ Included CW Decoder and keyer
■ Weather Fax (HF-Fax) Decoder
■ Creation, maintenance of Slices, TNFs, Filters
■ Unlimited number of Slices, Panadapters (limited only by radio model)
■ CWX support including Sidetone and live send mode
■ Software Paddle or Straight-Key support
■ Maintain all Radio, Slice and Panadapter settings
■ Support for Memories
■ Profiles integration (TX, Microphone and Global)
■ Audio settings supported including equalizers
■ Support for TX Settings like Power including all Tuning features
■ Transverter support
■ SmartLink™ remote access
■ MultiFlex™ support
■ SmartControl support
■ HomeKit support to control radio, antenna switches etc. remotely
■ Direct support for Power Genius XL (PGXL), Tuner Genius (TGXL), Antenna Genius (AGXL) and Rotator Genius (RGXL) local and remote
For HomeKit, you can use any Power Plug or Switch that are HomeKit compatible.
In addition to SmartSDR for Windows, this App offers these features:
■ Band limits and Band maps and modes will be displayed inside the Pan adapter
■ DX Cluster support which displays spots directly inside the Pan adapter
■ Graphical tuning knob for easy and exact frequency selection.
■ Various additional minor bells and whistles such as easy TNF maintenance,
■ Direct Bandwidth selection, Split Mode, instant Memory creation and more.
■ Device logging and device parameter monitoring (e.g. PA Temperature etc.)
■ Logbook integration with ADIF Im- and Export
■ Support for two Bluetooth and USB Controllers
■ Voice Macro recording and playback
There are just a few limitations compared to SmartSDR for Windows which are:
- Only one Panadapter visible at the same time.
- Diversity is not implemented.
WHAT YOU NEED:
- A FlexRadio Systems® FLEX-6000 or 8000 series radio
- An iPhone or iPad that runs at least iOS 16
NETWORK REQUIREMENTS:
To run this App at your home, nothing else but a regular WiFi connection is needed that can access your FLEX Radio. You can immediately start using the App.
For Remote operation via SmartLink™ a Version 2 License is required for your Radio.
The App supports Splitscreen Multitasking on the newer iPads so you can run SmartSDR in split mode parallel to your browser, Email software or any other App.
SUPPORTED SDR HARDWARE:
FLEX-6300, FLEX-6400, FLEX-6400M, FLEX-6500, FLEX-6600, FLEX-6600M, FLEX-6700,FLEX-8400, FLEX-8400M, FLEX-8600, FLEX-8600M
Find out more here: https://ham-radio-apps.com
Read the Manual: https://go-to.me/smartsdr-manual版本: 7.0.70
版本更新日期
2025-04-24
SmartSDR™ - FlexRadio Systems®
Official SDR Client
更新日志
This update contains the following changes and improvements:
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE应用描述
Official FlexRadio Systems® Client - NOW: All-Inclusive, no In-App Purchase!
SmartSDR is a full featured radio client that enables your iPad or iPhone to operate your FlexRadio device.
It is fully compatible to SmartSDR v1, v2 (including SmartLink) and v3 (including MultiFlex and SmartControl).
Please note: This App requires a FlexRadio Systems® Series 6000 or 8000 Software Defined Radio (SDR) Device.
FACTS AND FEATURES:
SmartSDR offers almost all features of SmartSDR for Windows such as:
■ Supports FT8 and FT4 (iPad and iPhone Max, Firmware 2 required)
■ Included CW Decoder and keyer
■ Weather Fax (HF-Fax) Decoder
■ Creation, maintenance of Slices, TNFs, Filters
■ Unlimited number of Slices, Panadapters (limited only by radio model)
■ CWX support including Sidetone and live send mode
■ Software Paddle or Straight-Key support
■ Maintain all Radio, Slice and Panadapter settings
■ Support for Memories
■ Profiles integration (TX, Microphone and Global)
■ Audio settings supported including equalizers
■ Support for TX Settings like Power including all Tuning features
■ Transverter support
■ SmartLink™ remote access
■ MultiFlex™ support
■ SmartControl support
■ HomeKit support to control radio, antenna switches etc. remotely
■ Direct support for Power Genius XL (PGXL), Tuner Genius (TGXL), Antenna Genius (AGXL) and Rotator Genius (RGXL) local and remote
For HomeKit, you can use any Power Plug or Switch that are HomeKit compatible.
In addition to SmartSDR for Windows, this App offers these features:
■ Band limits and Band maps and modes will be displayed inside the Pan adapter
■ DX Cluster support which displays spots directly inside the Pan adapter
■ Graphical tuning knob for easy and exact frequency selection.
■ Various additional minor bells and whistles such as easy TNF maintenance,
■ Direct Bandwidth selection, Split Mode, instant Memory creation and more.
■ Device logging and device parameter monitoring (e.g. PA Temperature etc.)
■ Logbook integration with ADIF Im- and Export
■ Support for two Bluetooth and USB Controllers
■ Voice Macro recording and playback
There are just a few limitations compared to SmartSDR for Windows which are:
- Only one Panadapter visible at the same time.
- Diversity is not implemented.
WHAT YOU NEED:
- A FlexRadio Systems® FLEX-6000 or 8000 series radio
- An iPhone or iPad that runs at least iOS 16
NETWORK REQUIREMENTS:
To run this App at your home, nothing else but a regular WiFi connection is needed that can access your FLEX Radio. You can immediately start using the App.
For Remote operation via SmartLink™ a Version 2 License is required for your Radio.
The App supports Splitscreen Multitasking on the newer iPads so you can run SmartSDR in split mode parallel to your browser, Email software or any other App.
SUPPORTED SDR HARDWARE:
FLEX-6300, FLEX-6400, FLEX-6400M, FLEX-6500, FLEX-6600, FLEX-6600M, FLEX-6700,FLEX-8400, FLEX-8400M, FLEX-8600, FLEX-8600M
Find out more here: https://ham-radio-apps.com
Read the Manual: https://go-to.me/smartsdr-manual版本: 7.0.68
版本更新日期
2025-04-16
SmartSDR™ - FlexRadio Systems®
Official SDR Client
更新日志
This update contains the following changes and improvements:
◉ iPad Only: A new Command Bar feature was added to start apps, send CAT commands or open Websites. Command Bar buttons can be displayed in a floating window and used along with keyboard shortcuts
◉ The click on spot feature to show call information in an open Call Lookup window now also works for FT8 Spots
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE应用描述
暂无应用描述数据
版本: 7.0.65
版本更新日期
2025-04-01
SmartSDR™ - FlexRadio Systems®
Official SDR Client
更新日志
This update contains the following changes and improvements:
◉ Now, if the Call Lookup Tool is open, clicking on Spots will display details about the call sign, including whether it has been worked before, along with distance and bearing
◉ Includes necessary changes to support new radio firmware and recent iOS versions
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE应用描述
Official FlexRadio Systems® Client - NOW: All-Inclusive, no In-App Purchase!
SmartSDR is a full featured radio client that enables your iPad or iPhone to operate your FlexRadio device.
It is fully compatible to SmartSDR v1, v2 (including SmartLink) and v3 (including MultiFlex and SmartControl).
Please note: This App requires a FlexRadio Systems® Series 6000 or 8000 Software Defined Radio (SDR) Device.
FACTS AND FEATURES:
SmartSDR offers almost all features of SmartSDR for Windows such as:
■ Supports FT8 and FT4 (iPad and iPhone Max, Firmware 2 required)
■ Included CW Decoder and keyer
■ Weather Fax (HF-Fax) Decoder
■ Creation, maintenance of Slices, TNFs, Filters
■ Unlimited number of Slices, Panadapters (limited only by radio model)
■ CWX support including Sidetone and live send mode
■ Software Paddle or Straight-Key support
■ Maintain all Radio, Slice and Panadapter settings
■ Support for Memories
■ Profiles integration (TX, Microphone and Global)
■ Audio settings supported including equalizers
■ Support for TX Settings like Power including all Tuning features
■ Transverter support
■ SmartLink™ remote access
■ MultiFlex™ support
■ SmartControl support
■ HomeKit support to control radio, antenna switches etc. remotely
■ Direct support for Power Genius XL (PGXL), Tuner Genius (TGXL), Antenna Genius (AGXL) and Rotator Genius (RGXL) local and remote
For HomeKit, you can use any Power Plug or Switch that are HomeKit compatible.
In addition to SmartSDR for Windows, this App offers these features:
■ Band limits and Band maps and modes will be displayed inside the Pan adapter
■ DX Cluster support which displays spots directly inside the Pan adapter
■ Graphical tuning knob for easy and exact frequency selection.
■ Various additional minor bells and whistles such as easy TNF maintenance,
■ Direct Bandwidth selection, Split Mode, instant Memory creation and more.
■ Device logging and device parameter monitoring (e.g. PA Temperature etc.)
■ Logbook integration with ADIF Im- and Export
■ Support for two Bluetooth and USB Controllers
■ Voice Macro recording and playback
There are just a few limitations compared to SmartSDR for Windows which are:
- Only one Panadapter visible at the same time.
- Diversity is not implemented.
WHAT YOU NEED:
- A FlexRadio Systems® FLEX-6000 or 8000 series radio
- An iPhone or iPad that runs at least iOS 16
NETWORK REQUIREMENTS:
To run this App at your home, nothing else but a regular WiFi connection is needed that can access your FLEX Radio. You can immediately start using the App.
For Remote operation via SmartLink™ a Version 2 License is required for your Radio.
The App supports Splitscreen Multitasking on the newer iPads so you can run SmartSDR in split mode parallel to your browser, Email software or any other App.
SUPPORTED SDR HARDWARE:
FLEX-6300, FLEX-6400, FLEX-6400M, FLEX-6500, FLEX-6600, FLEX-6600M, FLEX-6700,FLEX-8400, FLEX-8400M, FLEX-8600, FLEX-8600M
Find out more here: https://ham-radio-apps.com
Read the Manual: https://go-to.me/smartsdr-manual版本: 7.0.64
版本更新日期
2025-03-26
SmartSDR™ - FlexRadio Systems®
Official SDR Client
更新日志
This update contains the following changes and improvements:
◉ Notable improvement in FT8 decoding with the introduction of multi-pass decoding
◉ Additional FT8 decoding improvement for weaker signals surrounded by big signals
◉ New Ultra Beam Tool added (iPad only)
◉ New CTR2-Dial Controller support added
◉ Fixed an issue with DST
◉ Fixed an issue when using Call-Sign Pre- or Suffixes in FT8
◉ Minimum requirement is now iOS 17
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE应用描述
暂无应用描述数据
版本: 7.0.60
版本更新日期
2025-03-03
SmartSDR™ - FlexRadio Systems®
Official SDR Client
更新日志
This update contains the following changes and improvements:
◉ Some bug fixes for the POTA tool
◉ Some additional PSK Reporter improvements
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE应用描述
暂无应用描述数据
版本: 7.0.55
版本更新日期
2025-02-20
SmartSDR™ - FlexRadio Systems®
Official SDR Client
更新日志
This update contains the following changes and improvements:
◉ For the the 3-Antenna TGXL it is now also possible on iPhones to switch Antennas
◉ You can now perform a reverse search in PSK Reporter with an empty call sign, allowing you to discover other HAM operators currently active in a specific mode.
◉ Searches in PSK Reporter now include VARA and FREEDV modes.
◉ Added support for submitting WSJT-X decodes via UDP, enabling integration with tools like GridTracker.
◉ The PSK Reporter submission settings have been relocated from FT8 settings to the app settings for better organization.
◉ A new PSK Reporter submission Update Interval settings has been added
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE应用描述
Official FlexRadio Systems® Client - NOW: All-Inclusive, no In-App Purchase!
SmartSDR is a full featured radio client that enables your iPad or iPhone to operate your FlexRadio device.
It is fully compatible to SmartSDR v1, v2 (including SmartLink) and v3 (including MultiFlex and SmartControl).
Please note: This App requires a FlexRadio Systems® Series 6000 or 8000 Software Defined Radio (SDR) Device.
FACTS AND FEATURES:
SmartSDR offers almost all features of SmartSDR for Windows such as:
■ Supports FT8 and FT4 (iPad and iPhone Max, Firmware 2 required)
■ Included CW Decoder and keyer
■ Weather Fax (HF-Fax) Decoder
■ Creation, maintenance of Slices, TNFs, Filters
■ Unlimited number of Slices, Panadapters (limited only by radio model)
■ CWX support including Sidetone and live send mode
■ Software Paddle or Straight-Key support
■ Maintain all Radio, Slice and Panadapter settings
■ Support for Memories
■ Profiles integration (TX, Microphone and Global)
■ Audio settings supported including equalizers
■ Support for TX Settings like Power including all Tuning features
■ Transverter support
■ SmartLink™ remote access
■ MultiFlex™ support
■ SmartControl support
■ HomeKit support to control radio, antenna switches etc. remotely
■ Direct support for Power Genius XL (PGXL), Tuner Genius (TGXL), Antenna Genius (AGXL) and Rotator Genius (RGXL) local and remote
For HomeKit, you can use any Power Plug or Switch that are HomeKit compatible.
In addition to SmartSDR for Windows, this App offers these features:
■ Band limits and Band maps and modes will be displayed inside the Pan adapter (In-App Purchase)
■ DX Cluster support which displays spots directly inside the Pan adapter (In-App Purchase)
■ Graphical tuning knob for easy and exact frequency selection.
■ Various additional minor bells and whistles such as easy TNF maintenance,
■ Direct Bandwidth selection, Split Mode, instant Memory creation and more.
■ Device logging and device parameter monitoring (e.g. PA Temperature etc.)
■ Logbook integration with ADIF Im- and Export (In-App Purchase)
■ Support for two Bluetooth and USB Controllers (In-App Purchase)
■ Voice Macro recording and playback
There are just a few limitations compared to SmartSDR for Windows which are:
- Only one Panadapter visible at the same time.
- Diversity is not implemented.
WHAT YOU NEED:
- A FlexRadio Systems® FLEX-6000 or 8000 series radio
- An iPhone or iPad that runs at least iOS 16
NETWORK REQUIREMENTS:
To run this App at your home, nothing else but a regular WiFi connection is needed that can access your FLEX Radio. You can immediately start using the App.
For Remote operation via SmartLink™ a Version 2 License is required for your Radio.
The App supports Splitscreen Multitasking on the newer iPads so you can run SmartSDR in split mode parallel to your browser, Email software or any other App.
SUPPORTED SDR HARDWARE:
FLEX-6300, FLEX-6400, FLEX-6400M, FLEX-6500, FLEX-6600, FLEX-6600M, FLEX-6700,FLEX-8400, FLEX-8400M, FLEX-8600, FLEX-8600M
Find out more here: https://ham-radio-apps.com
Read the Manual: https://go-to.me/smartsdr-manual版本: 7.0.53
版本更新日期
2025-01-31
SmartSDR™ - FlexRadio Systems®
Official SDR Client
更新日志
This update contains the following changes and improvements:
◉ Fixed some iOS compatibility issues
◉ Fixed issues on some iPad Mini devices
◉ Some additional minor fixes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE应用描述
Official FlexRadio Systems® Client - NOW: All-Inclusive, no In-App Purchase!
SmartSDR is a full featured radio client that enables your iPad or iPhone to operate your FlexRadio device.
It is fully compatible to SmartSDR v1, v2 (including SmartLink) and v3 (including MultiFlex and SmartControl).
Please note: This App requires a FlexRadio Systems® Series 6000 or 8000 Software Defined Radio (SDR) Device.
FACTS AND FEATURES:
SmartSDR offers almost all features of SmartSDR for Windows such as:
■ Supports FT8 and FT4 (iPad and iPhone Max, Firmware 2 required)
■ Included CW Decoder and keyer
■ Weather Fax (HF-Fax) Decoder
■ Creation, maintenance of Slices, TNFs, Filters
■ Unlimited number of Slices, Panadapters (limited only by radio model)
■ CWX support including Sidetone and live send mode
■ Software Paddle or Straight-Key support
■ Maintain all Radio, Slice and Panadapter settings
■ Support for Memories
■ Profiles integration (TX, Microphone and Global)
■ Audio settings supported including equalizers
■ Support for TX Settings like Power including all Tuning features
■ Transverter support
■ SmartLink™ remote access
■ MultiFlex™ support
■ SmartControl support
■ HomeKit support to control radio, antenna switches etc. remotely
■ Direct support for Power Genius XL (PGXL), Tuner Genius (TGXL), Antenna Genius (AGXL) and Rotator Genius (RGXL) local and remote
For HomeKit, you can use any Power Plug or Switch that are HomeKit compatible.
In addition to SmartSDR for Windows, this App offers these features:
■ Band limits and Band maps and modes will be displayed inside the Pan adapter (In-App Purchase)
■ DX Cluster support which displays spots directly inside the Pan adapter (In-App Purchase)
■ Graphical tuning knob for easy and exact frequency selection.
■ Various additional minor bells and whistles such as easy TNF maintenance,
■ Direct Bandwidth selection, Split Mode, instant Memory creation and more.
■ Device logging and device parameter monitoring (e.g. PA Temperature etc.)
■ Logbook integration with ADIF Im- and Export (In-App Purchase)
■ Support for two Bluetooth and USB Controllers (In-App Purchase)
■ Voice Macro recording and playback
There are just a few limitations compared to SmartSDR for Windows which are:
- Only one Panadapter visible at the same time.
- Diversity is not implemented.
WHAT YOU NEED:
- A FlexRadio Systems® FLEX-6000 or 8000 series radio
- An iPhone or iPad that runs at least iOS 16
NETWORK REQUIREMENTS:
To run this App at your home, nothing else but a regular WiFi connection is needed that can access your FLEX Radio. You can immediately start using the App.
For Remote operation via SmartLink™ a Version 2 License is required for your Radio.
The App supports Splitscreen Multitasking on the newer iPads so you can run SmartSDR in split mode parallel to your browser, Email software or any other App.
SUPPORTED SDR HARDWARE:
FLEX-6300, FLEX-6400, FLEX-6400M, FLEX-6500, FLEX-6600, FLEX-6600M, FLEX-6700,FLEX-8400, FLEX-8400M, FLEX-8600, FLEX-8600M
Find out more here: https://ham-radio-apps.com
Read the Manual: https://go-to.me/smartsdr-manual版本: 7.0.50
版本更新日期
2025-01-14
SmartSDR™ - FlexRadio Systems®
Official SDR Client
更新日志
This update contains the following changes and improvements:
◉ Fixed a bug when importing ADIF files with wrong characters
◉ Fixed an issue when using a non-standard or prefix call sign in FT8
◉ Fixed a bug where AGC can no longer be changed in the right Radio Panel in some situations
◉ Fixed a bug when selecting a different logbook, the title was not updated
◉ New MIDI commands added for reverse frequency tuning
◉ New MIDI command to toggle SplitMode added
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the 'CONTACT DEVELOPER' feature within the app under Settings for any issue reports.
I will ensure it is promptly resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE应用描述
Official FlexRadio Systems® Client - NOW: All-Inclusive, no In-App Purchase!
SmartSDR is a full featured radio client that enables your iPad or iPhone to operate your FlexRadio device.
It is fully compatible to SmartSDR v1, v2 (including SmartLink) and v3 (including MultiFlex and SmartControl).
Please note: This App requires a FlexRadio Systems® Series 6000 or 8000 Software Defined Radio (SDR) Device.
FACTS AND FEATURES:
SmartSDR offers almost all features of SmartSDR for Windows such as:
■ Supports FT8 and FT4 (iPad and iPhone Max, Firmware 2 required)
■ Included CW Decoder and keyer
■ Weather Fax (HF-Fax) Decoder
■ Creation, maintenance of Slices, TNFs, Filters
■ Unlimited number of Slices, Panadapters (limited only by radio model)
■ CWX support including Sidetone and live send mode
■ Software Paddle or Straight-Key support
■ Maintain all Radio, Slice and Panadapter settings
■ Support for Memories
■ Profiles integration (TX, Microphone and Global)
■ Audio settings supported including equalizers
■ Support for TX Settings like Power including all Tuning features
■ Transverter support
■ SmartLink™ remote access
■ MultiFlex™ support
■ SmartControl support
■ HomeKit support to control radio, antenna switches etc. remotely
■ Direct support for Power Genius XL (PGXL), Tuner Genius (TGXL), Antenna Genius (AGXL) and Rotator Genius (RGXL) local and remote
For HomeKit, you can use any Power Plug or Switch that are HomeKit compatible.
In addition to SmartSDR for Windows, this App offers these features:
■ Band limits and Band maps and modes will be displayed inside the Pan adapter (In-App Purchase)
■ DX Cluster support which displays spots directly inside the Pan adapter (In-App Purchase)
■ Graphical tuning knob for easy and exact frequency selection.
■ Various additional minor bells and whistles such as easy TNF maintenance,
■ Direct Bandwidth selection, Split Mode, instant Memory creation and more.
■ Device logging and device parameter monitoring (e.g. PA Temperature etc.)
■ Logbook integration with ADIF Im- and Export (In-App Purchase)
■ Support for two Bluetooth and USB Controllers (In-App Purchase)
■ Voice Macro recording and playback
There are just a few limitations compared to SmartSDR for Windows which are:
- Only one Panadapter visible at the same time.
- Diversity is not implemented.
WHAT YOU NEED:
- A FlexRadio Systems® FLEX-6000 or 8000 series radio
- An iPhone or iPad that runs at least iOS 16
NETWORK REQUIREMENTS:
To run this App at your home, nothing else but a regular WiFi connection is needed that can access your FLEX Radio. You can immediately start using the App.
For Remote operation via SmartLink™ a Version 2 License is required for your Radio.
The App supports Splitscreen Multitasking on the newer iPads so you can run SmartSDR in split mode parallel to your browser, Email software or any other App.
SUPPORTED SDR HARDWARE:
FLEX-6300, FLEX-6400, FLEX-6400M, FLEX-6500, FLEX-6600, FLEX-6600M, FLEX-6700,FLEX-8400, FLEX-8400M, FLEX-8600, FLEX-8600M
Find out more here: https://ham-radio-apps.com
Read the Manual: https://go-to.me/smartsdr-manual
微信公众号
七麦数据公众号
七麦研究院公众号
APP下载
- IOS
- Android
@2014-2022 qimai.cn，北京七麦科技股份有限公司 All Rights Reserved. 京ICP备14049953号
京公网安备 11010502041000号
